MENENTUKAN KEDALAMAN DAN KETEBALAN AKUIFER DENGAN METODE LOGGING TAHANAN JENIS PADA WAKTU PENGEBORAN AIR TANAH

Authors

  • Sri M. Yuningsih

DOI:

https://doi.org/10.32679/jsda.v5i1.460

Keywords:

Depth & thickness of aquifer, resistivity logging, groundwater

Abstract

The aim of this resistivity logging measurement is to decide the stratification of rock and distribution of
aquifer based on the resistivity value. The objective of the well logging is to determine the depth and thickness
of aquifer for well construction, in order to decide the position of screen in the aquifers .Interpretation results
of the resistivity logging of aquifer of sand and sandy tuff vary between 20 – 40 ohm-m and 60 – 115 ohm-m for
breccia. Groundwater in the Ciparay and Cibodas areas is predicted in the depth of 42 – 66 m and 75 – 108 m,
consisting of intercalation of young volcanic fan and Bandung lake deposit. The aquifer in Dago area is less
than 100 m deep representing young volcanic deposit including the Cibeureum Formation, whereas aquifers
with a depth of more than 100 m comprise volcanic deposit, including the Cikapundung Formation. It is
recommended to extract groundwater from more than 50 m deep, in order to prevent influence to phreatic
aquifer as excavated well. The minimum kind of well logging for groundwater drilling should consist of
resistivity, self-potential and gamma ray logging.

References

Adang S.Soewaeli, 2004, Tata cara

Pencatatan Akuifer Dengan Metode

Logging Geolistrik Tahanan Jenis Short

Normal dan Long Normal Dalam Rangka

Eksplorasi Air Tanah, RSNI T-05-2004,

SNI, Badan Standar Nasional, BSN.

Assad Fakhry, 2004, Field Methods for

Geologist and Hydrogeologists, Springer

– Verlag, Berlin-Heidelberg 2004, Printed

in Germany.

Bruce Misstear, 2006, Water Wells and

Boreholes, John Wiley & Sons Ltd, The

Atrium, Southern Gate, Chichester, West

Sussex PO19 8SQ, England.

Kevin Hiscock, 2005, Hydrogeology

Principles and Practice, Blackwell

Publishing Science Ltd, USA

Kollert, 1969, Groundwater Exploration

By The Electrical Resistivity Method,

Geophysical Memorandum 3,

Geophysics &Electronics, Atlas Copco

ABEM, Sweden.

Reinhard Kirsch, 2006, Groundwater

Geophysics, A Tool For Hydrogeology,

Springer-Verlag, Berlin-Heidelberg

, Printed in Germany

Published

2018-04-12

How to Cite

Yuningsih, S. M. (2018). MENENTUKAN KEDALAMAN DAN KETEBALAN AKUIFER DENGAN METODE LOGGING TAHANAN JENIS PADA WAKTU PENGEBORAN AIR TANAH. JURNAL SUMBER DAYA AIR, 5(1), 27–42. https://doi.org/10.32679/jsda.v5i1.460

Issue

Section

ARTIKEL